Wanted: Internal wings wires and terminals

A forum about all aspects of the construction and maintenance of the original Hatz CB-1 biplane. Here is the place to ask your questions and get the answers from the real experts.
vern
Posts: 26
Joined: Fri Dec 11, 2015 3:23 pm

Wanted: Internal wings wires and terminals

Post by vern »

Wanted: Internal wings wires and terminals

Has anyone made their own?
Thanks!

Vern Darley
Peachtree City, GA
vern@mindspring.com
stearmoth
Posts: 234
Joined: Mon Apr 26, 2010 12:47 pm

Re: Wanted: Internal wings wires and terminals

Post by stearmoth »

Hi Vern,

Yes, we made our own light weight drag/antidrag wires (tie rods) and also for several other builders. See the forum under "sources" etc, or use this link:

viewtopic.php?f=20&t=225&p=3498&hilit=d ... ires#p3498

Again, if we could collect at least orders for at least 6 sets, we would make a production run. Although we do not have the terminals available.

Hans & Sam, H.C.#78, Switzerland
JBMoore
Posts: 236
Joined: Wed Mar 17, 2010 5:44 am

Re: Wanted: Internal wings wires and terminals

Post by JBMoore »

Do a search for "anti drag" and you will see several discussions on making your own.

Jeff Moore
Jeff Moore
Treasurer-HBA
Pendleton, IN.
User avatar
Bitshifter
Posts: 202
Joined: Thu Aug 02, 2012 5:12 pm
Location: Avondale Pa
Contact:

Re: Wanted: Internal wings wires and terminals

Post by Bitshifter »

I used the wires that Hans & Sam produced and although I am not yet flying I am very happy with them.
The quality is much better that what I would have been able to make.
Ed White
HC 154

"In life 10% wrong is failure, in school it's an A"
vern
Posts: 26
Joined: Fri Dec 11, 2015 3:23 pm

Re: Wanted: Internal wings wires and terminals

Post by vern »

Thanks all!

Vern
Post Reply