Hatz Project Tour

A forum about all aspects of the construction and maintenance of the Billy Dawson inspired modified Hatz Classic biplane. Here is the place to ask your questions and get the answers from the real experts.
mmarien
Posts: 177
Joined: Thu Jul 23, 2015 9:50 am
Location: Saskatoon, Saskatchewan, CANADA

Hatz Project Tour

Post by mmarien »

I'm headed for Atlantic Canada in early May. I was planning on flying back through the US along the Atlantic Coast then back west south of the Great Lakes. I wouldn't mind stopping to see some of the Hatz projects if possible. I would probably be in the US the weekend of May 12-15. If you are available that weekend and have time to show your project send me a message.
Murray Marien - HC 0180
Saskatoon Canada
User avatar
dougm
Posts: 498
Joined: Wed Mar 17, 2010 2:39 pm
Location: Douglas, MA
Contact:

Re: Hatz Project Tour

Post by dougm »

I'll be around if you want to drop in. Send me a msg or email for details.
Doug
Building Hatz Classic s/n 093 & Rotec R3600
Hatz Webmaster
User avatar
Bitshifter
Posts: 202
Joined: Thu Aug 02, 2012 5:12 pm
Location: Avondale Pa
Contact:

Re: Hatz Project Tour

Post by Bitshifter »

I am in Pa, 5 minutes from New Garden, N57. I will be around also.
Ed White
HC 154

"In life 10% wrong is failure, in school it's an A"
mmarien
Posts: 177
Joined: Thu Jul 23, 2015 9:50 am
Location: Saskatoon, Saskatchewan, CANADA

Re: Hatz Project Tour

Post by mmarien »

Thanks Doug and Ed. I'll put those places in my route and let you know when I expect to be there. We can firm up details closer to the date.
Murray Marien - HC 0180
Saskatoon Canada
mtaylor
Posts: 255
Joined: Tue Mar 23, 2010 5:11 pm

Re: Hatz Project Tour

Post by mtaylor »

Southwestern Ohio (OH65). Welcome with a heads up and if the runways are dried up by mid May. Hatz #493-flying for 4 years.
Last edited by mtaylor on Sun Apr 09, 2017 7:14 am, edited 1 time in total.
mmarien
Posts: 177
Joined: Thu Jul 23, 2015 9:50 am
Location: Saskatoon, Saskatchewan, CANADA

Re: Hatz Project Tour

Post by mmarien »

Added OH65 to the route. Looking forward to meeting you.
Murray Marien - HC 0180
Saskatoon Canada
User avatar
dougm
Posts: 498
Joined: Wed Mar 17, 2010 2:39 pm
Location: Douglas, MA
Contact:

Re: Hatz Project Tour

Post by dougm »

LZD or SFZ are closest to me.
Doug
Building Hatz Classic s/n 093 & Rotec R3600
Hatz Webmaster
ssearle
Posts: 34
Joined: Sun Jan 31, 2016 6:35 pm

Re: Hatz Project Tour

Post by ssearle »

I am in SW Ontario, about 100 nm north of Toronto.
Always at the hangar - CYHS Hanover Saugeen Municipal Airport, drop by if you wish.
You can stay overnight with us too if you make it up here.
The project is covered now, I hope to finish by July - Classic with Rotec engine.
Steve
mmarien
Posts: 177
Joined: Thu Jul 23, 2015 9:50 am
Location: Saskatoon, Saskatchewan, CANADA

Re: Hatz Project Tour

Post by mmarien »

Steve. We're stopping in Ottawa for a couple days the weekend of May.06-07. If I don't stop on the way thru May.06 I'll come back from Ottawa for a day trip. We're going to firm up the plans apr.20.2017 and will let you know.

Doug. I had you at KORH but will change that to KSFZ or KLZD

Murray
Murray Marien - HC 0180
Saskatoon Canada
User avatar
dougm
Posts: 498
Joined: Wed Mar 17, 2010 2:39 pm
Location: Douglas, MA
Contact:

Re: Hatz Project Tour

Post by dougm »

mmarien wrote: Doug. I had you at KORH but will change that to KSFZ or KLZD

Murray
Technically correct, but Worcester is a pain and KSFZ or KLZD are the same or less driving time to the house.
Doug
Building Hatz Classic s/n 093 & Rotec R3600
Hatz Webmaster
Post Reply