3/16" plexiglass wind screens for Hatz
-
WaldoWright
- Posts: 1
- Joined: Mon Dec 03, 2018 9:33 am
3/16" plexiglass wind screens for Hatz
I make windscreens for Travel Airs, Wacos, Fairchild KR-34 and most recently a Parks P2-A. Thought I'd post here to see if there was any interest from Hatz owners/restorers. The windscreens are fabricated from 3/16" aircraft grade plexiglass and are drape formed over a buck. These wind screens are far superior to Lexan and will not crack, fracture or yellow over time as Lexan tends to do. They can be attached using an aluminum retainer or tabs. Cost is $500.00 a set and I just have two sets left from the latest run. I can be reached at rob@waldowrights.com
You do not have the required permissions to view the files attached to this post.
-
scsmith
- Posts: 4
- Joined: Tue Jan 09, 2024 2:35 pm
Re: 3/16" plexiglass wind screens for Hatz
Are you still offering these windscreens?
I'm building HC-054.
I'm building HC-054.
Steve Smith
retired Aeronautical Engineer
Building a Hatz Classic s/n 054. Carrying on for original build starter Nicholas Boughen
RV-8, N825RV w/ IO-360-A1A finished Sept 2009 750 hrs
LS-6 15m sailplane
C-182B (towplane)
retired Aeronautical Engineer
Building a Hatz Classic s/n 054. Carrying on for original build starter Nicholas Boughen
RV-8, N825RV w/ IO-360-A1A finished Sept 2009 750 hrs
LS-6 15m sailplane
C-182B (towplane)