Streamline Tubing Clamps

A forum about all aspects of the construction and maintenance of the Billy Dawson inspired modified Hatz Classic biplane. Here is the place to ask your questions and get the answers from the real experts.
Post Reply
User avatar
splischke
Posts: 115
Joined: Thu Mar 18, 2010 8:41 pm
Contact:
Contact splischke

Streamline Tubing Clamps

Post by splischke »

Can these clamps (see picture of the cabane below) be purchased or are they builder-fabricated?

-Scott

Image
Scott Plischke. Building Hatz Classic #86 from plans. See http://www.thehatz.com
Top
jwhanson
Posts: 96
Joined: Tue Mar 16, 2010 11:55 pm

Re: Streamline Tubing Clamps

Post by jwhanson »

You will probably have to make them. We used scrap 6061-T6 which was easy to form around the strut. Any soft aluminum will work too.
John Hanson
Top
hatz215
Posts: 107
Joined: Tue Mar 23, 2010 3:29 pm

Re: Streamline Tubing Clamps

Post by hatz215 »

I took a scrap piece of streamline tube and tacked a short 3/8 OD rod to it. Used it as a form to bend the strap around and used an 8-32 on the trailing edge end to clamp the strap together. Used a strip of black naugahyde inside it to protect the finish on the cabane.

Steve G
Top
Post Reply

Return to “Building and Maintaining the Hatz Classic”